Parts & Accessories
- Replacement stabilizers set for Bike Travel Bag Pro
The EVOC FRAME PAD protects the bike frame from scratches and other transport damage. - Fits most bike frames - Attachment for handlebar - Velcro straps attachment
Tool Wrap WP
$29.95 - $34.95
The B-RAD Accessory Strap Mount is designed to add an additional strap point for tire levers, tubes or CO2 cartridges. Mounts to bottle bosses, or to the B-RAD base for additional carrying options. - Mounts to bottle bosses, or to the B-Rad base for additional carrying options - Main strap is 50mm wide and holds loads 75-120mm diameter (3 - 4.75 inches) - Cradle strap is 40mm wide and 350mm long for supporting loads
While the classic seat pack is a great place to store little-used essentials out of the elements, their mounting systems can interfere with and often damage modern dropper seatposts. Valais allows the use of a traditional seatbag on a dropper seatpost. - Allows the usage of seat packs on a dropper post - Protects the dropper stanchion from wear and grit - Can act as a travel limiter when full drop isn't needed - Sized by stanchion diameter
B-RAD, which stands for Bottle Relocation and Accessory Device, is a system for organizing on-bike accessory storage using bottle cage mounts. Used alone to shift bottle cage location for clearance, or combine with other B-RAD accessories to carry tools, tubes pumps or a 2nd bottle on downtubes. - Three slots for additional adjustments over the B-RAD 2 base - Compatible with triple bottle mounts on forks or frames, use neoprene pad and zip tie for use with standard bottle cage mounts
B-RAD, which stands for Bottle Relocation and Accessory Device, is a system for organizing on-bike accessory storage using bottle cage mounts. Used alone to shift bottle cage location for clearance, or combine with other B-RAD accessories to carry tools, tubes pumps or a 2nd bottle on downtubes. - Long, four-slotted mount allows two, smaller bottles to be mounted in-line - Compatible with triple bottle mounts on forks or frames, use included neoprene pad and zip tie for use with standard bottle cage mounts
The B-RAD Dogbone allows for the bottle cage to mounted off center with additional B-RAD accessories, without needing the B-RAD base. Most commonly used for smaller, curved or dual suspension frames where the slotted bases won't fit or are not needed.
B-RAD Bottle Mounts allow for cargo customization and cargo optimization. They are designed to work in tandem with B-RAD Base mounts to keep cargo on the bike and off the back. - Compatible with any bike frame that has 2 standard 64mm spacing bottle cage mounts (most modern frames) - 6061-T6 aluminum brackets, stainless hardware - Weight (no hardware) – 20g - Maximum load 1700g - Designed to carry two bottles or accessories off of one B-RAD base
Replacement hardware, bolts and nuts for Wald baskets. Works with Wald Basket models: 520, 520GB, 535 and 535GB
The Gel Fuel Rack / NDM 1 give the user the ability to reach their gels and similar snacks at any time while our on the trails. The "grab-n-pull" aspect of the rack makes it super fast for you to fuel up with new energy. The accessory is compatible with backpacks equipped with the No Dancing Monkey 1.0 and No Dancing Monkey 1.2 harnesses. This attachment is compatible with the following products: - Raw - MTB Hydro - Airborne - Ranger - Patriot - Vertical - Outlander (NOT Compatible with Outlander PRO) With the Gel Fuel Rack / NDM 1 you'll always have instant access to your gels or other small snacks. The "grab-n-pull" make it super fast to fuel up with new energy. The accessory can be attached to the harness of all backpacks equipped with the No Dancing Monkey 1.0 and No Dancing Monkey 1.2 harnesses. The accessory is simply attached to the Velcro shoulder strap. This attachment is compatible with the following products:
The USWE Phone Pocket is the perfect accessory for your USWE backpack. The Phone Pocket gives you the opportunity to access your phone quickly at any time without taking the pack off your back. The main compartment is meant for your phone and is accessed through the zipper on the side of the pocket. The secondary compartment is a mesh pocket on the front of the accessory. This compartment is perfect for stashing things like gels or keys for instant access. The pocket can fit a wide range of phones. The following measurements are approximately the maximum measurements a phone can have. - Standard: 14.5 cm (5.7") height x 6.5 cm (2.5") width - XL: 17.5 cm (6.9") height x 9.5 cm (3.8") width
Solid aluminum dropper post mount to attach rear bikepacking bag, larger saddle bag, bottle cage, tail light, and more.
QuickClick mount for racing type saddles. Works with all Topeak Wedge Bags. - Material : Injected Nylon - Weight: 30g / 1.06 oz
Fast and easy attachment of Topeak handlebar bags. - Clamp: Fits 25.4/28.6/31.8 mm Handlebars (shims included)
Take your bike adventures even further with a versatile mount cage to pack larger gear on your bike. The included tie-down straps provide the ability to carry a DryBag, sleeping bag/pad, stuff sack, or any round shaped gear on your bike frame or fork with bottle bosses. A four-hole mount design offers height adjustment of your load for better balance. VersaMount clamps also provide easy installation and flexible mounting options. - Fits tubes 20-60mm. - Engineering grade polymer - 64 mm mounting height adjustable - Weight: 128g - Max load: 3kg / 6.61lb - Dimensions: 22 x 12 x 7cm / 8.7 x 4.7 x 2.8-inches
Mount struts to your heart's content with Salsa's 8mm Strut Mount kit.
- Diameter: 8mm - Overall Length: 345mm - After Bend: 270mm - 45 degree bend
Stash your ride snacks, repair kit, or other ride essentials in this secure and stylish KEG. - Fits in standard bottle cages - Keeps contents secure and dry - Matches Salsa Dawn Patrol socks, bottle, and hat
The Salsa EXP Series 35.0 Anything Cradle Arms are for mounting the Salsa EXP Series Anything Cradle (sold separately) to handlebars with a 35.0mm or 31.8mm clamp diameter. - Compatible with 35.0mm bars or 31.8mm bars (with included shims) - Compatible with all Salsa EXP Series Anything Cradles - Hinged clamps allow for easy installation and removal from handlebars - Made of 6061 forged aluminum
The EXP Series Direct Mount Thumb Screws allow for quick and easy attachment of Salsa EXP Series Direct Mount Packs to bicycle frames equipped with direct-mount locations. - Can be installed and removed by hand or with allen key - Includes necessary 0.5 mm washers and 4 mm spacers - Sold in packages of two
$18.99 - $19.99
The Salsa EXP Series Rubber Strap is a strong, adjustable strap that holds your gear securely to Salsa Anything Cages, Anything Cradles, or racks. Use them anywhere you need to secure a load on your bike. - UV- and weather-resistant - Includes band to keep excess strap out of the way - 22" length is best for use with Salsa Anything Cage and Anything Cage HD - 30" length is best for use with Salsa Anything Cradle - Sold in pairs
- Fits Salsa Minimalist and Alternator Racks - 8mm x 370mm
Lower mount kit for all Salsa's Alternator Racks (sold separately)
- Spacers for Explorer Exp Barbag
The PDW Outpost Mount allows you to attach a handlebar-mounted headlight to the side of your tapered wire basket—eliminating the problem of basket cargo blocking the light beam. The attachment plate compensates for the angle of a tapered wire basket, allowing the headlight to stay nice and level. - 32mm diameter clamping area for lights - Attaches with two M5 bolts and a steel backing plate - Mounts on left or right side
The integrable mesh inner pocket with zipper for the Handlebar-Pack QR. For all small items, such as wallet, snacks, cell phone or keys.
This mounting set allows you to attach your Saddle-Bags to other bicycles. For all Saddle-Bag, MudRacer and Micro models. - 1 mounting set for Saddle-Bags, including screws
These handy adapters are for mounting a rack on bikes where clearance is needed for disc brake calipers or other accessories. - Screw them into the same holes on the dropouts for rack or fender bolts - Made from special hardened aluminum stock with a threaded steel insert - Best when only torqued to the same degree as rack bolts - Pegs are about .75" long - Can be used single sided or double sided - Sold in Pairs
Page 1 of 2 Next page