Filter By:
29-Inch
$1,599.99
Trail wheels often fall into two categories—they’re either heavy and durable or light and flexy. And because of this, a lightweight, wide-profile, and enduro-ready carbon wheel seems like something only found in a fairytale, but lucky for you, we made it a reality. The Traverse SL Fattie 29 puts all the features you need in an all-mountain wheel into one package, and it has the results to prove it.
Along with light overall weight, stiffness, and durability, another top priority for the Traverse SL was ease of use. First off, we got rid of the creaky straight-pull spokes and corrosion-prone alloy nipples. Next up, we landed on 28 J-bend spokes, for both the front and rear wheels, that are all the same length—making it easy to find replacements if needed. And finally, we engineered a new hub design, with a wider profile and higher flange to aid in overall stiffness.
What's with the big-boned name, you ask? The Traverse SL Fatties may be wide, but with a 30mm inner rim width, they’re far from the girth of a fat bike rim. But let's talk width. You've probably noticed that mountain bike rim widths have hovered between 19 and 23 millimeters for decades, and they've been long overdue for a change. In the search for a better wheel design, our engineers began testing 2.3- to 2.5-inch tires on 45-millimeter-wide fat bike rims to see what, if any, benefits could be found. It only took them a few rides to realize that the wider rims offered a variety of advantages, like adding additional tire volume, which better supports the tires in hard cornering, greatly improves traction because of the ability to run lower pressures, and noticeably increases rim stiffness. They did note that there is an occurrence of diminishing returns with increasing width, however, and after testing everything from 25 to 45mm, determined that a 30mm inner width is optimal.
After determining the width, we began designing the rim using the knowledge that we gained when developing the Control SL. With this, we started with our Zero Bead Hook technology that gets rid of the weak spot found in a traditional wheel, and combined it with the wider profile to make a carbon rim that effectively dissipates forces. This way, you can take abuse from rocks without the worry of cracks or dents. Ok, so they’re strong, impact-resistant, and tire supporting—they must be heavy, right? Wrong. Even though “fattie” is in their name, they're far from fat.
To achieve this weight, we hand-build our rims to our own alloy hubs, using only the highest quality DT Swiss Competition Race spokes. Inside our hubs, you'll find DT Swiss 240 internals with a quick engaging 54t DT Swiss star ratchet system in the rear that allows you to power over rocks and roots without delay. And while machines do a pretty good job of building wheels, we choose professionally trained humans because they do so with an artistic touch that makes for minimal flaws.
Whether you need a carbon wheelset to get you through an enduro stage or one to shred your local rock garden, the Traverse SL Fattie has you covered.
$114.99
The new Stout XC SL 29 front wheel includes a strong, double-wall alloy rim, stainless steel spokes, brass nipples, and a reliable Shimano Center Lock hub. Charcoal decals complete the look, making this a perfect OE replacement or XC-ready upgrade.
- Lightweight and reliable Shimano hub.
- Double-wall, disc-specific rim is strong and durable.
- Brass nipples hold spoke tension securely and resist rust for added durability.
- Stainless spokes won't rust, easing long-term maintenance.
$139.99
The new Stout XC SL 29 rear wheel features 141mm hub spacing and a 9mm QR axle for increased wheel stiffness and improved riding performance. It includes a strong, double-wall alloy rim, stainless steel spokes, brass nipples, and a reliable Shimano Center Lock hub. Charcoal decals complete the look, making this a perfect OE replacement or XC-ready upgrade.
- Lightweight and reliable Shimano hub. QR Boost 141x9mm spacing.
- Double-wall, disc-specific rim is strong and durable.
- Brass nipples hold spoke tension securely and resist rust for added durability.
- Stainless spokes won't rust, easing long-term maintenance.
$2,499.99
Fastest XC Wheels In the Real World 1240 grams is an obscenely light weight when talking about mountain bike wheelsets, the kind of weight that XC racers dream about. But light weight alone is no longer enough. So, we engineered the new Control SL wheels to be sharp handling, smooth riding, extra durable, and 22% less likely to pinch-flat your tires, in addition to being some of the lightest weight production wheels on the planet.
- Rim Type: Carbon clincher, 2Bliss Ready, Zero Bead Hook 4mm FlatTop design. Compatible with tire inserts.
- Rim Width: 29mm internal
- Front Hub: Alloy body, 15mmx110 thru-axle, 19 and 31mm OD end cap options included. Max Rotor Size <200mm
- Front Spoke Pattern: DT Swiss Aerolite Straightpull 294mm, 24-hole, Two-cross
- Rear Hub: CNC-machined alloy body, SiNC Ceramic Bearings, premium-quality DT 180 internals and 36t quick engagement ratchet system cassette, includes SRAM XD Driver and 148 end caps. Max Rotor Size <200mm
- Rear Spoke Pattern:DT Swiss Aerolite Straightpull 294mm, 24-hole, Two-cross
- Bearing Type: SiNC Ceramic Sealed cartridge
- Nipple Type: DT Swiss Pro Lock Hexagonal Alloy 14mm 2.0mm
- Total Wheelset Weight: 1240g
- System Weight Limit: 275lbs/125kg
$1,599.99
Today's XC race machines are marvels of modern engineering, evolved to decrease weight while improving ride quality and durability, with the idea to carry the world’s best athletes to the top step of the podium.The Reserve 28 XC is the race-ready culmination of everything learned from years at the highest levels of competition, and it delivers on a heap of promises. At a genre blurring 1300g for a complete wheelset (with no rider weight limit and our market-defining lifetime warranty), the 28 XC features a wider and lower rim profile to increase strength and lateral rigidity, while adding vertical compliance for enhanced traction.
- Designed for XC riding and racing
- Carbon fiber construction with 2.8mm asymmetric offset
- Step-in internal rim bed to ease tubeless installation
- Lower profile for added lateral stiffness with increased vertical compliance
- Ships with rim tape installed, tubeless-ready valves, and cards identifying the Santa Cruz builder of each of your wheels
- Backed by Santa Cruz lifetime warranty
$249.99
Give 'em your worst
Aggressive with a downright surly attitude, the new Aeffect R wheelset was built to provide you with category-leading Trail to Enduro good times with a 30mm-wide, offset 6069 alloy rim and new Trace hub to make for an unstoppable combo of toughness and durability.
Rough And Rowdy
Made to handle all kinds of Enduro and all-mountain punishment, the burly Aeffect R rim sports a 30mm inner width and is born tubeless ready.
Balance is Key
Aeffect R sports a stout, 6069 alloy rim with a 4.5mm-offset spoke bed to provide spoke tension balance, increasing wheel stiffness and overall fatigue life.
No Frills, All Thrills
The new Trace hub doesn't need flash or gimmicks. Highlights include: durable cartridge bearings, no-nonsense 10-degree engagement, a tough steel axle, and all relevant cassette body options. This hub will get the job done, ride after ride.
$349.99
Give 'em your worst
Aggressive with a downright surly attitude, the new Aeffect R wheelset was built to provide you with category-leading Trail to Enduro good times with a 30mm-wide, offset 6069 alloy rim and new Trace hub to make for an unstoppable combo of toughness and durability.
Rough And Rowdy
Made to handle all kinds of Enduro and all-mountain punishment, the burly Aeffect R rim sports a 30mm inner width and is born tubeless ready.
Balance is Key
Aeffect R sports a stout, 6069 alloy rim with a 4.5mm-offset spoke bed to provide spoke tension balance, increasing wheel stiffness and overall fatigue life.
No Frills, All Thrills
The new Trace hub doesn't need flash or gimmicks. Highlights include: durable cartridge bearings, no-nonsense 10-degree engagement, a tough steel axle, and all relevant cassette body options. This hub will get the job done, ride after ride.
$799.99
Race Face's first carbon wheelset comes to market during Peak Enduro, meaning people are hitting the trails as hard as they can at all angles. Striking the balance between shred-ready and climb-crushing, Race Face incorporated a generous 31mm internal width for a trail-stomping footprint, a durable carbon layout built for enduro style abuse, and an offset spoke hole layout delivering improved tension balance to up the sturdiness. With the Vault Hub’s super fast engagement, long bearing life, and spoke flanges designed for maximizing lateral stability, you can take your rally to the next level. Get ready to be fast in every direction.
2 Year No Fault Guarantee
HUB
- Large oversize flange for improved bracing angle
- Larger bearings
- No bearing adjuster needed
- Balanced spoke counter bore
- Tool-free interchangeable end caps (sold separately)
RIM
- Full carbon fiber construction
- 31mm Internal width tubeless ready rim
- 4.5mm Offset – Improves spoke balance and wheel stiffness
- High gloss black water transfer logos
$849.99
Race Face's first carbon wheelset comes to market during Peak Enduro, meaning people are hitting the trails as hard as they can at all angles. Striking the balance between shred-ready and climb-crushing, Race Face incorporated a generous 31mm internal width for a trail-stomping footprint, a durable carbon layout built for enduro style abuse, and an offset spoke hole layout delivering improved tension balance to up the sturdiness. With the Vault Hub’s super fast engagement, long bearing life, and spoke flanges designed for maximizing lateral stability, you can take your rally to the next level. Get ready to be fast in every direction.
2 Year No Fault Guarantee
HUB
- Large oversize flange for improved bracing angle
- Larger bearings
- No bearing adjuster needed
- Wider bearing stance 6 double tooth pawls (3 engage at a time)
- 120 points of engagement (3 degrees)
- Independently sprung pawls
- Balanced spoke counter bore
- Tool-free interchangeable end caps (sold separately)
RIM
- Full carbon fiber construction
- 31mm Internal width tubeless ready rim
- 4.5mm Offset – Improves spoke balance and wheel stiffness
- High gloss black water transfer logos
$279.99
Being a company of mountain bikers, when Race Face set out to design a new wheel, their goal was simple, "Make the wheel we want to ride."
HUB
- Large oversized flange for improved bracing angle
- Larger bearings
- No bearing adjuster
- Wider bearing stance
- Balanced spoke counter bore
- Tool-free interchangeable end caps (sold separately)
RIM
- 30mm Internal width tubeless ready rim
- 4.5mm Offset – Improves spoke balance and wheel stiffness
- New stronger alloy for highest impact resistance of any Race Face or Easton rim
- High gloss black water transfer logos
$129.99
Blending the versatility and performance of tubeless ready rims with a broad range of axle compatibility makes these wheels a great choice for service or upgrades options. Rims can accommodate tubes and clincher tires without modification.
- Tubeless ready
Specifications:
- Hub/Brake Compatibility: Center-Lock Disc
- Color: Black
- Wheel Size: 29"
- ISO Diameter: 622 / Road / 29"
- Valve: Presta
- Rim Width (Internal): 23
- Defined Color: Black
- Front Axle: 15mm Thru x 110mm
- Tire Type: Tubeless Ready Clincher
Page 1 of 1