Stems

The Odyssey stem bolt pack features 6 - 6mm stem bolts that are M8 x 1.25mm thread.

Kalloy's 822 Adjustable Stem lets you set up your handlebars exactly where you want them using just an allen wrench! With a 0-60° rise, you're sure to find a position that puts you comfortably in control. Its 4-bolt handlebar clamp makes bar changes easy and secure. - For quill-style steerers

Comfort is king when you dial in your riding position with Profile's Boa Threadless Stem. This light and durable welded-aluminum stem features a 20- to 40-degree rise and a secure two-bolt faceplate that makes installing the handlebars a breeze.

Dimension 25.4 Stem is a fully forged 6061-T6 aluminum stem with 4-bolt handlebar clamp. - 2-D forged AL-6061-T6 - Four-bolt handlebar clamp - 41mm height - Dimension stems are not intended for use with carbon handlebars or carbon steerer tubes - Weight: 130g-180g

Dimension 26.0 Stems - Dimension stems are not intended for use with carbon handlebars or carbon steer tubes - Fully forged AL-6061-T6 - 4-bolt handlebar clamp - Weight: 140g-180g

Dimension 31.8 Stems are fully forged 6061-T6 aluminum stems that have a 4-bolt handlebar clamp. - 31.8mm can be used with 26.0 bars with additional shim (SM5317) - Dimension stems are not intended for use with carbon handlebars or carbon steer tubes - Weight: 130g-180g

- 3D forged alloy construction - Fits 1-1/8-inch (28.6mm) steerer forks - Fits 31.8mm handlebar clamp - Heat treated hardware - Weight: 152g (100mm)

- 3D forged alloy construction - Fits 1-1/8-inch (28.6mm) steerer forks - Fits 25.4mm handlebar clamp - M6 Black hardware - Weight: 161g (110mm)

Race Face's Ride stem is designed specifically for riders looking for Race Face engineering and quality at a value price point. - Forged and shot peened from 6061 aluminum for high strength and fatigue resistance at a reasonable weight - Four bolt bar clamp holds bar securely in position - Machined logo on bar clamp

For cross country and all-mountain riding, Dimension Trail Stems provide a broad array of sizing options, rigorously tested to ISO 4210 Mountain standards. - Constructed with AL-6061-T6 aluminum - Shot-peened finish - Dimension stems are not intended for use with carbon handlebars or carbon steerer tubes

Dial in your perfect bike fit with FSA's Omega Stem. 3D-forged and CNC machined construction makes this stem stiff and light for power transfer and steering precision. The four-bolt faceplate holds bars securely, and this stem features stainless steel bolt hardware.

For cross country and all-mountain riding, Dimension Trail Stems provide a broad array of sizing options, rigorously tested to ISO 4210 Mountain standards. - Constructed with AL-6061-T6 aluminum - Shot-peened finish - Dimension stems are not intended for use with carbon handlebars or carbon steerer tubes

TruVativ's Hussefelt is an aggressive DH/freeride stem forged from 6061 aluminum for superb stiffness and superior strength. The short length provides supreme confidence when railing down the sketchiest steeps. Four bolts attach the faceplate for a vise-like grip on your bars, and the 2-bolt clamp secures to your steerer for pinpoint steering precision and stiffness.

- Unique style, modern geometry, and rock solid construction, without the heavy price tag - Suitable for all disciplines: Freeride, All Mountain, Enduro - Chamfered bar-clamps to reduce stress risers and increase fatigue life in handlebars - Ideal for shorter riders to improve the setup of their cockpit. - Length (mm): 40 - Rise: 0° - Diameter (mm): 31.8 - Stack height (mm): 35 - Weight (g): ±170 - Finish: Shot peen anodized, laser logos

- 3D net forged 6061 alloy construction - Angled steer tube clamp slot reduces stress on carbon steer tubes - Stainless steel bar and steerer clamp bolts - Material: 3D net forged 6061 - Angle: +/- 6 degree - Steerer Height: 42mm - Steerer: 1-1/8" - Faceplate Width: 42mm - Bead-blast Black finish - 160g (110mm)

Pro caliber features at a real-world racer price. This 3D net forged 6061 aluminum stem offers +/- 30 degrees of stem angle for riders wanting a more comfortable fit. The angled steer tube clamp slot reduces stress on carbon steer tubes. - Material: 3D net forged 6061 - Angle: +/-30 degree - Steerer Height: 45mm - Steerer: 1-1/8” - Faceplate Width: 40mm - BB black finish - 170g (110mm)

When the 4-Axis faceplate came out, it changed the industry. Proven time after time to be a reliable, easily adjustable system that continues to outperform the competition, the 4-Axis stem is a sure fire go to for an entry level stem that has world class performance. - Material: 3D net forged 6061 alloy - Angle: 84/6 degree - Stack: 42mm - Steerer: 1-1/8" - Faceplate Width: 42mm - 150g (110mm)

- C-220 degree extra-wide bar clamp improves stiffness and fits most riser bars - 3D forged 6061 alloy - 42mm steerer height with 41mm faceplate width - 142g (90mm)

With its classic blend of high strength and low weight, Easton's EA50 stem is a smart choice for your favorite ride. It's made of 3D forged aluminum for amazing stiffness and strength. Easton's Top-Lock technology locks the stem and faceplate together, creating a highly rigid interface while minimizing the loads on the bolts, making the EA50 perfectly safe for carbon bars.

Salsa's Guide Stem is lightweight, durable, and provides excellent steering response on the road or trail. - Bead-blasted, then anodized - 3D-forged for increased strength, then CNC-machined - 4-bolt faceplate design for easy installation - Stack Height: 40

The Guide Trail Stem is lightweight, durable, and provides excellent steering response. Available in super short lengths for use on new-school trail bikes with wide bars, short rear ends, and long front-center geometry. - AL-6061-T6 aluminum construction - 3D-forged for increased strength, then CNC-machined - 4-bolt faceplate design - 31.8mm bar clamp - Bead-blasted, then anodized, finish

TruVativ's Stylo T20 stem is 3D forged for that perfect balance of light weight, stiffness and control on the trail. Four bolts securely attach the face plate and make changing out handlebars a breeze.

Save your steerer tube and eliminate headset spacers with the Velo Orange Tall-Stack alloy stem. It gives your bike's cockpit a nice clean look. Available in Polished or Black, the 17-degree angle allows the stem to be level on most modern frames. And, you can use handlebar clamp shims to adapt to smaller handlebar clamp diameters, if you like. - Stack height: 75mm - Not recommended for use with carbon steerer tubes

- AL 6066-T6 3D forged alloy construction - Fits 1-1/8 (28.6mm) steerer forks - Fits 31.8mm handlebar clamp - +/- 6 degree angle - Heat treated hardware - Stack height: 41.8mm

A little H2O is a crucial part of every ride! This sweet stem is made of 6061-T6 aluminum for a light, strong ride. Cold 3D forging adds strength and a nice finish.

RaceFace's Chester 35 Stem is a practical stem with 2 length options and that legendary bomb-proof Race Face toughness baked right in. - Forged and machined from 6061 aluminum - Interlocking 4 bolt bar clamp secures your bar and distributes loads away from bolts and into the body - Stack Height: 42mm

A favorite of FMB Freeride pros, All Mountain warriors, and Enduro racers alike, the SPIKE Race Stem blends tough and sexy seamlessly. 2D Forged for ultimate strength, then CNC weight-optimized in every way, the SPIKE Race Stem might be a lightweight, but its iconic hourglass sectional profile lends the immense torsional stiffness required by SPANK's pros. The burly 31.8mm bar clamp zone is chamfered to reduce stress risers and increase fatigue life in handlebars. Available in super-short 35mm or conventional 50mm lengths, with a minimal stack height, the SPIKE Race Stem brings style and confidence to any ride. - Key technologies: MGR, chamfered bar clamp, "Snap Fit" sealed top cap - Material: 2D Forged MGR Alloy, CNC Weight Optimized - Length (mm): 35 / 50 - Rise: 0° - Diameter (mm): 31.8 - Stack height (mm): 35 - Weight (g): ±150 (35mm) / ±180 (50mm) - Finish: polish anodized, CNC/laser logos - Technologies: MGR - Discipline: race / freeride

Profile's Aris OS stem is a no-nonsense stem made from 6061-aluminum that's been shot peened and anodized for strength and durability. The 4-bolt faceplate is stiff, ultra tough and makes handlebar changes a breeze. And, the opposing-bolt steerer clamp is safe and secure.

Profile's Aris stem is a no-nonsense stem made from 6061-aluminum that's been shot-peened and anodized for strength and durability. The 4-bolt face plate is stiff, ultra tough and makes handlebar changes a breeze. And, the opposing-bolt steerer clamp is safe and secure.

- Proven alloy strength and security for racing or freeriding - 2D forged alloy body and wide, chamfered bar-clamps offer unparalleled support to handlebars, enhancing safety and longevity in your DH cockpit - Shot peened and anodized for high strength and low weight - CNC weight optimized for 31.8 bars - Key Technologies: MGR, chamfered bar clamp - Material: 2D Forged MGR Alloy, CNC Weight Optimized - Length: (mm) 50 - Rise: (°) 15 - Diameter (mm): 31.8 - Stack Height (mm): N/A - Weight (g): ±150 - Finish: Shotpeen anodized, laser logos